Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

08.06.2025 09:55

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

but I think this circuit , shows a few more pieces.

First Sentence:

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What habits do happy couples have?

These are simplified answers to the original question, and does not change anything I wrote above.

At one ohm, the resistor has a maximum of 1 watt power.

This one hit behind the barn.

These stocks are overbought after a strong May for Wall Street and could be due for a pullback - CNBC

One

nine

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Do you like wearing short skirts?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

eight

What is the most gay experience with your dad?

In schematic diagrams this is the symbol for a fuse:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

It also is a device that limits the change in current flow.

To those people in the world who have access to universal healthcare, what experiences could you share with Americans in order for us to understand how it affects your life (positively or negatively)?

What does a fuse do?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Wells Fargo Stock Rises as Fed Lifts Asset Cap After 7 Years - Barron's

2024–10–10[John johnson John Johnson ]

This device then solves the entire problem.

the problem then depends on "how fast does the fuse operate?".

What is your review of Hartley`s High School, Kolkata?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What is lightning?

He then describes the function of a fuse.

Procter & Gamble says it will cut 7,000 jobs over the next 2 years - CBS News

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

A fuse is a non-resetable over current circuit protector.

The other is “what does a “fuse” do?”

With Micah Parsons, the Cowboys foolishly drag their feet — again - NBC Sports

But… the neutral is now “floating” because of the 1 ohm resistance.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

so, what happens?

Angelina Jolie And Brad Pitt’s Daughter Shiloh Reintroduces Herself With New Name - HuffPost

The bolt then partially travels down the line to your home.

Edit 2024–10.

An AC voltage/ current source, and an ac inductive load.

Can the right person make a narc want to change their ways? Is love that powerful? Has anyone seen this or experience it?

2024–10–16 [ OO OLAOYE OYEBODE ]

but this device (an Inductor) … impedes the rapid changes in the current.

One is “what exactly is in a ‘surge protector’ ? ”

It seems Mohan does not understand the difference between a comment and an Answer.

A circuit breaker is similar, but is resettable.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is where the MOV conducts again, and dissipated the energy.

Upvotes:

This is 'the assistant's answer'

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

He then describes Rainy Season and Lightning.

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Barnstars:

Now when you have a certain ac resistance, then a current flows in a loop.

a photo is worth a thousand words.

For this case there are devices called Metal oxide varistors (MOV).

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

But it can get overloaded, and no longer works.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Because the load is inductive, the current lags the voltage.(by a bit).

[old diagram got deleted by accident]

Here is a simplified AC power diagram.

I post the exact comment here.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

(Dc diagram shown, AC is similar).

what exactly is a ‘surge’ protector?

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So, the voltage could go up to 500 volts, and the fuse will not open up.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

There are three different concepts here that are getting confused.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

These devices are installed between the “hot” and “neutral” and protective ground.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

The MOV will conduct when the voltage exceeds 50% of line voltage.

He then asserts :

The third is lightning and “how it gets conducted into a home.”

At least they know the answer if they wanted it.

There are two important concepts here.

[image of Common-mode choke]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Can the fuse protect the electronic devices from lightning instead of a surge protector.